Tel. +39 011 9588274
212.000 SERIMAT
Vinyl with a matt, homogeneous and very opaque appearance. Chemical adhesion on many substrates of thermoplastic origin: PVC both in sheet and in rigid or soft sheet, inflatable PVC, polyester pretreated with primer, specific for adhesives in general, fake leather, sky, extruded methacrylate, objects in general, cardboard, ABS, polystyrene (attention to the choice of diluents) some acetalics (with subsequent firing at least 90 ° C), pre-painted vinyl sheets in vinyl also with cold drying, paper, cardboard, wood, clothing and TNT, bags, overprinting offset and other media still.
UK data sheet
215.000 SERIGLOSS
Ink with a very bright appearance, without flocculations and very opaque. Chemical adhesion on many substrates of thermoplastic origin: PVC both in sheet and in rigid or soft sheet, polyester pretreated with primer, adhesives in general, ABS, polystyrene (attention to the choice of the diluents), some acetalics (after firing at least 90 ° C ), Polymethylmethacrylate extrusions, some aminoplasts, pre-painted vinyl sheets with cold drying, objects, cardboard, wood, clothing, TNT, bags, overprinting offset and other supports. Different types of white with high opacity and viscosity are available.
217.000 SERIJET
It has a shiny-brilliant appearance and is free from flocculations. It has a high standard of coverage and dries on the support in a very short time without drying on the frame. Adherence on many supports of thermoplastic origin: PVC both in sheet and in rigid or soft sheet, specific for polyester pretreated with primer and for PVC very coated and coated, sky, banners, uppers, truck tarpaulins, ABS, polystyrene (polystyrene) with attention to the choice of thinners, sheets of prepainted aluminum in vinyl and polyurethane and other supports. 217 SERIJET can easily be printed on very soft PVC in high pile because it is specific to oppose the recovery of plasticizers. Very suitable for printing with reel / reel machines and automatic with short air ovens.
222.000 CARBOMAT
Opaque, homogeneous and extremely covering ink. High elasticity and resistance to cold drawing. It adheres chemically to many substrates of thermoplastic origin: PVC both in sheet and in rigid or soft sheet, inflatable PVC, imitation leather, sky, cardboard, ABS, polystyrene (attention to the choice of thinners), overprinting on offset. 222 CARBOMAT has also been formulated for printing on PC Polycarbonate, on details that must be backlit. The non-aggressiveness of the ink does not inflate the Polycarbonate even in the thinner thicknesses.
225.000 OMNIALUX
Very shiny, bright looking ink. Exceptional elasticity and resistance to cold drawing. Adheres to many supports of thermoplastic origin: PVC both in sheet and in rigid or soft sheet, inflatable PVC, imitation leather, sky, cardboard, ABS, polystyrene (attention to the choice of thinners), overprint on offset, specific for Polycarbonate and PETG from thermoforming, methacrylate. Specific for the printing of helmets in PETG that must undergo strong drawing. The minimum aggressiveness of the ink does not inflate the Polycarbonate even in the thinner thicknesses. High adhesion on pre-painted aluminum (cold). The resistance to alcohol is good. It resists discreetly to some organic solvents.
UK data sheet
230.000 PLEXIFORM
Glossy-looking ink free of flocculations. Adherence on many supports of thermoplastic origin: PVC both in sheet and in rigid or soft sheet, ABS, polystyrene (polystyrene) with attention to the choice of diluents, PMMA Extruded and casted polymethylmethacrylate with specific characteristics of thermoforming and in the realization of signs, polycarbonate in mass (with particular attention to the use of specific diluents to avoid cracking) and other supports. Exceptional resistance to the exterior
240.000 SERIPROP
Semi-glossy and perfectly homogeneous ink; free from flocculations. Adheres to many substrates of cellulosic origin: cellulose acetate in sheet, cardboard, polystyrene (attention to the choice of diluents), PETG, methacrylate, Compact Disk, pre-painted aluminum etc. Especially formulated to adhere on polyolefins with a minimum surface tension of 39 DIN: polythene and polypropylene, polyvalent, priplack, overprint U.V. The adhesion on the polyolefin supports is maximum if the support is treated with corona treatment, flaming, plasma or other treatments aimed at raising the tension to values above 39 DIN. Catalysts and Primers specific for each application.
241 ECOPROP
Semi-glossy and perfectly homogeneous ink; free from flocculations. Adheres to many substrates of cellulosic origin: cellulose acetate in sheet, cardboard, polystyrene (attention to the choice of diluents), PETG, methacrylate, Compact Disk, pre-painted aluminum etc. Especially formulated to adhere on polyolefins with a minimum surface tension of 39 DIN: polythene and polypropylene, polyvalent, priplack, overprint U.V. The adhesion on the polyolefin supports is maximum if the support is treated with corona treatment, flaming, plasma or other treatments aimed at raising the tension to values above 39 DIN. Catalysts and Primers specific for each application.
Ink based on selected and high quality cellulose resins. All components of 241 ECOPROP are in compliance with the REACH regulation (CE) n. 1907/2006 of the European Parliament and of the Council concerning the registration, evaluation, authorization and restriction of chemical substances and related updates and summaries. 241 ECOPROP complies with the ISO EN 71/9 regulation concerning the presence of hazardous solvents. The application of the ISO standard EN 71-3 2013 Category III - Scraped off materials, in force since 20 July 2013 and EN 71-9 provides for the execution of 19 control analyzes on the real presence of heavy metals in the preparation. The analyzes are released under the conditions expressed in the declaration. Consult the Quasar laboratory for further information.
250.000 FLEXIPRINT GLOSS U.V.
U.V. polymerization hybrid ink very polished, free from floculations. Adherence on many supports of thermoplastic origin: PVC both in sheet and in rigid or soft sheet, ABS, polystyrene (polystyrene), treated Polyester, Polycarbonate, paper and cardboard, extruded Polymethylmethacrylate. It is not suitable for thermoforming. It also adheres to polyolefins if of surface tension> 42 Din. The maximum adhesion to polypropylene (priplack, polionda, etc.) occurs after at least 5/6 hours from the polymerization. After this time, the ink develops greater adhesion than that obtained at the oven outlet.
Available 250.105 FLEXIPRINT A RILIEVO paint for the realization of Braille or similar thicknesses.
256.000 VERNICI FINALI POLIPRINT U.V.
Poliprint overprint varnishes have a very bright appearance. Adherence on many thermoplastic substrates: PVC, ABS, polystyrene (polystyrene), treated polyester, polycarbonate, paper and porous cardboard. They adhere to the polyolefins with a surface tension of >39 Din.
262.000 NYLOFLEX
Has a satin and free of flocculations look. Adherence on many supports: polyamide, nylon, synthetic fabrics of various origin, polyester fabrics, k-way, supports of thermoplastic origin, PVC, ABS, polystyrene, with specific diluents, polycarbonate (with particular attention to the use of specific diluents avoid cracking) objects, slipping decals for helmets, and other supports. The addition of the CATALIST 291.59 increases sealing on difficult substrates and silicone-coated nylon
266.000 PLASTISOL NEW
It has a semi-glossy and perfectly homogeneous appearance. It is declared exempt from Ftalati. It adheres to all fabrics in cotton, natural fiber, acrylic and acrylic blend, TNT non-woven fabric and many other types of natural and mixed fibers that can withstand firing at 150 ° C. Resistance is good on polyester. It can be printed on silicon paper for transfer printing, in combination with the transfer thermoplastic glue, paying attention to the number of passages in the oven for multicolored prints.
269.000 MODATEX
The Modatex 269.000 ink is characterized by a very soft hand even if printed in strong thicknesses. Very opaque and elastic, it is printed on natural and synthetic fabrics. Used for direct printing on cotton fabrics, even discreetly elastic, light and dark, Olona canvas, cotton knit, mixed acrylic fabrics (up to 50% cotton), sweatshirts, mixed fabrics with at least 65% natural fibers, linen. On polyester it has a good grip.
270.000 EPOXERI
The Epoxeri 270.000 bicomponent ink has a glossy and perfectly homogeneous appearance without flocculations. It adheres to many ferrous supports, aluminum, brass, raw and pre-painted sheets, stainless steel, all previously degreased. It also adheres to pre-treated glass, polyethylene and polypropylene, melamine, melamine and in general to all thermo-hardening supports.
272 THERMOLUX
Single-component glossy oven-baked. It adheres to many ferrous supports, raw and anodized aluminum, brass, copper, raw and pre-painted sheets, stainless steel, all previously degreased (with 290.50 Degreaser for Metals) and deoxidized. The degree of oxidation of the metal is proportional to the poor seal of the ink. 272 THERMOLUX adheres to glass, melamine, melamine and in general to all thermo-hardening supports.
273 METALSHEET
Single-component opaque oven-baked. It adheres to many ferrous supports, raw and anodized aluminum, brass, copper, raw and pre-painted sheets, stainless steel, all previously degreased (with 290.50 Degreaser for Metals) and deoxidized. The degree of oxidation of the metal is proportional to the poor seal of the ink. 273 METALSHEET Tightens on glass, melamine, melamine and in general on all thermo-hardening supports.
290.52 SOLVENTE PULIZIA TELAI
290.52 CLEANING SOLVENT FRAME is based on rectified and controlled acetates. Specific to clean screen printing frames, pad printing plates, supports and digital tools, etc. The particular formulation of the
290.52 SOLVENTE PULIZIA TELAI allows you to dissolve all 20 types of ink produced by Quasar srl. The solvent is free of aromatic, pyrrolidone and toxic components.